|Effective region||European Economic Area|
|Website||CE Marking homepage|
The CE mark, or formerly EC mark, is a mandatory conformity marking for certain products sold within the European Economic Area (EEA) since 1985. The CE marking is also found on products sold outside the EEA that are manufactured in, or designed to be sold in, the EEA. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense similar to the FCC Declaration of Conformity used on certain electronic devices sold in the United States.
It consists of the CE logo and, if applicable, the four digit identification number of the notified body involved in the conformity assessment procedure.
The CE marking is the manufacturer's declaration that the product meets the requirements of the applicable EC directives.
The actual words signified by "CE" have been disputed. It is often taken to be an abbreviation of Conformité Européenne, meaning "European Conformity". However, "CE" originally stood for "Communauté Européenne", French for "European Community". In former German legislation, the CE marking was called "EG-Zeichen" meaning "European Community mark". The CE marking is a symbol of free marketability in the European Economic Area (Internal Market).
- 1 Meaning
- 2 Countries requiring the CE marking
- 3 Rules underlying CE marking
- 4 Self-certification
- 5 Declaration of conformity
- 6 Product groups
- 7 Mutual recognition of conformity assessment
- 8 Characteristics of CE marking
- 9 E mark
- 10 Misuse
- 11 See also
- 12 References
- 13 External links
Existing in its present form since 1995, the CE marking indicates the compliance with EU legislation of a product, wherever in the world manufactured, and enables its free movement within the European market. By affixing the CE marking on a product, a manufacturer is declaring, at its sole responsibility, conformity with all of the legal requirements to achieve CE marking which allows free movement and sale of the product throughout the European Economic Area. CE marking is intended for national market surveillance enforcement authorities.
CE marking signifies that the product conforms with all EC directives that apply to it. For example, most electrical products must comply with the Low Voltage Directive and the EMC Directive; electrical toys must also comply with the Toy Safety Directive. The marking does not indicate EEA manufacture. The manufacturer of CE-marked goods has verified that the product complies with all applicable EC requirements, such as safety, health, and environmental protection, and, if stipulated in any directive, has had them examined by a notified conformity assessment body.
Not all products need CE marking to be traded in the EC; only product categories subject to relevant directives are required (and allowed) to bear CE marking. Most CE-marked products can be placed on the market subject only to an internal production control by the manufacturer (Module A; see Self-certification, below), with no independent check of the conformity of the product with EU legislation; ANEC has cautioned that, amongst other things, CE marking cannot be considered a "safety mark" for consumers.
CE marking is a self-certification scheme. Retailers sometimes refer to products as "CE approved", but the mark does not actually signify approval. Certain categories of products require type-testing by an independent body to ensure conformity with relevant technical standards, but CE-marking in itself does not certify that this has been done.
Countries requiring the CE marking
CE marking is mandatory for certain product groups within the European Economic Area (EEA; the 28 member states of the EU plus EFTA countries Iceland, Norway and Liechtenstein) plus Switzerland and Turkey. The manufacturer of products made within the EEA and the importer of goods made in other countries must ensure that CE-marked goods conform to standards.
As of 2013[update] CE marking was not required by countries of the Central European Free Trade Agreement (CEFTA), but members Republic of Macedonia, Serbia, and Montenegro had applied for membership of the European Union, and were adopting many of its standards within their legislation (as did most Central European former member countries of CEFTA that joined the EU, before joining).
Rules underlying CE marking
Responsibility for CE marking lies with whoever puts the product on the market in the EU, i.e. an EU-based manufacturer, the importer or distributor of a product made outside the EU, or an EU-based office of a non-EU manufacturer.
The manufacturer of a product affixes the CE marking to it but has to take certain obligatory steps before the product can bear CE marking. The manufacturer must carry out a conformity assessment, set up an electromagnetic comprehensiveness technical file and sign an EC declaration of conformity. The documentation has to be made available to authorities on request.
Importers of products have to verify that the manufacturer outside the EU has undertaken the necessary steps and that the documentation is available upon request. Importers should also make sure that contact with the manufacturer can always be established.
Distributors must be able to demonstrate to national authorities that they have acted with due care and they must have affirmation from the manufacturer or importer that the necessary measures have been taken.
If importers or distributors market the products under their own name, they take over the manufacturer's responsibilities. In this case they must have sufficient information on the design and production of the product, as they will be assuming the legal responsibility when they affix the CE marking.
There are certain rules underlying the procedure to affix the marking:
- Products subject to certain EC directives providing for CE marking have to be affixed with the CE marking before they can be placed on the market.
- Manufacturers have to check, on their sole responsibility, which EU directives they need to apply for their products.
- The product may be placed on the market only if it complies with the provisions of all applicable directives and if the conformity assessment procedure has been carried out accordingly.
- The manufacturer draws up an EC declaration of conformity and affixes the CE marking on the product.
- If stipulated in the directive(s), an authorized third party (Notified Body) must be involved in the conformity assessment procedure.
- If the CE marking is affixed on a product, it can bear additional markings only if they are of different significance, do not overlap with the CE marking and are not confusing and do not impair the legibility and visibility of the CE marking.
Since achieving compliance can be very complex, CE-marking conformity assessment, provided by a Notified Body, is of great importance throughout the entire CE-marking process, from Design Verification, and set up of Technical File to the EC Declaration of Conformity.
Depending on the level of risk of the product, the CE marking is affixed to a product by the manufacturer or authorized representative who decides whether the product meets all the CE marking requirements. If a product has minimal risk, it can be self-certified by a manufacturer making a Declaration of Conformity and affixing the CE marking to their own product. In order to self-certify, the Manufacturer must do several things:
- 1. Decide whether the product needs to have a CE marking and if the product applies to more than one directive it needs to comply with all of them.
- 2. Choose the conformity assessment procedure from the modules called out by the directive for the product. There are several modules available for the Conformity Assessment Procedures as listed below:
- Module A – Internal production control.
- Module B – EC type-examination.
- Module C – Conformity to type.
- Module D – Production quality assurance.
- Module E – Product quality assurance.
- Module F – Product verification.
- Module G – Unit verification.
- Module H – Full quality assurance.
These will often ask questions about the product to classify the level of risk and then refer to the "Conformity Assessment Procedures" chart. This shows all the acceptable options available to a manufacturer to certify the product and affix the CE marking.
Products considered to have a greater risk have to be independently certified by a notified body. This is an organization that has been nominated by a Member State and has been notified by the European Commission. These notified bodies act as test labs and carry out the steps as listed in the directives mentioned above and then decided whether the product has passed. A manufacturer can choose its own notified body in any Member State of the European Union but should be independent of the manufacturer and a private sector organization or a government agency.
In reality the self-certification process consists of the following stages:
Stage 1: Identify the applicable Directive(s)
The first step is to identify whether the product needs to bear CE marking or not. Not all products are required to bear CE marking, only the products that fall within the scope of at least one of the sectoral directives requiring CE marking. There are more than 20 sectoral product directives requiring CE marking covering, but not limited to, products such as electrical equipment, machines, medical devices, toys, pressure equipment, PPE, wireless devices and construction products.
Identifying which directive(s) may be applicable, as there may be more than one, involves a simple exercise of reading the scope of each directive to establish which apply to the product (An example of the scope of the Low Voltage Directive below). If the product does not fall within the scope of any of the sectoral directives, then the product does not need to bear CE marking (and, indeed, must not bear CE marking).
Low Voltage Directive (2006/95/EC)
Article 1 states the Directive covers "any equipment designed for use with a voltage rating of between 50 and 1000 V for A.C. and between 75 and 1500 V for D.C, other than the equipment and phenomena listed in Annex II."
Stage 2: Identify the applicable requirements of the Directive(s)
Each Directive has slightly different methods of demonstrating conformity depending on the classification of the product and its intended use. Every Directive has a number of ‘essential requirements’ that the product has to meet before being placed on the market.
The best way to demonstrate that these essential requirements have been met is by meeting the requirements of an applicable ‘harmonised standard,’ which offer a presumption of conformity to the essential requirements, although the use of standards usually remains voluntary. Harmonised standards can be identified by searching the ‘Official Journal’ on the European Commission’s website, or by visiting the New Approach website established by the European Commission and EFTA with the European Standardisation Organisations.
Stage 3: Identify an appropriate route to conformity
Although the process is always a self-declaration process,there are various ‘attestation routes’ to conformity depending on the Directive and classification of the product. Some products (such as invasive medical devices, or fire alarm and extinguisher systems) may, to some extent, have a mandatory requirement for the involvement of an authorised third party or "notified body".
There are various attestation routes which include:
- An assessment of the product by the manufacturer.
- An assessment of the product by the manufacturer, with additional requirement for mandatory factory production control audits to be carried out by a third party.
- An assessment by a third party (e.g. EC type test), with the requirement for mandatory factory production control audits to be carried out by a third party.
Stage 4: Assessment of the product's conformity
When all of the requirements have been established, the conformity of the product to the essential requirements of the Directive(s) needs to be assessed. This usually involves assessment and/or testing, and may include an evaluation of the conformity of the product to the harmonised standard(s) identified in step 2.
Stage 5: Compile the technical documentation
Technical documentation, usually referred to as the technical file, relating to the product or range of products needs to be compiled. This information should cover every aspect relating to conformity and is likely to include details of the design, development and manufacture of the product.
Technical documentation will usually include:
- Technical description
- Drawings, circuit diagrams and photos
- Bill of materials
- Specification and, where applicable, Declarations of Conformity for the critical components and materials used
- Details of any design calculations
- Test reports and/or assessments
- EC Declaration of Conformity
- Technical documentation can be made available in any format (i.e. paper or electronic) and must be held for a period of up to 10 years after the manufacture of the last unit, and in most cases reside in the European Economic Area (EEA).
Stage 6: Make a Declaration and affix the CE marking
When the manufacturer, importer or authorised representative is satisfied that their product conforms to the applicable Directives, an EC Declaration of Conformity must be completed or, for partly completed machinery under the Machinery Directive, an EC Declaration of Incorporation.
The requirements for the Declaration vary slightly, but will at least include:
- Name and address of the manufacturer
- Details of the product (model, description and the serial number where applicable)
- List of applicable sectoral Directives and standards that have been applied
- A statement declaring that the product complies with all of the relevant requirements
- Signature, name and position of the responsible person
- The date that the Declaration was signed
- Details of the authorised representative within the EEA (where applicable)
- Additional Directive/standard specific requirements
- In all cases, except for the PPE Directive, all of the Directives can be declared on one Declaration.
- Once a Declaration of Conformity has been completed, the final step is to affix the CE marking to the product. When this has been done, the CE marking requirements have been met for the product to be placed legally on the EEA market.
Purpose for safety issues.
Declaration of conformity
The DoC must include: manufacturer's details (name and address, etc.); essential characteristics the product complies; any European standards and performance data; if relevant the identification number of the Notified Body; and a legally binding signature on behalf of the organization.
The directives requiring CE marking affect the following product groups:
- Active implantable medical devices
- Appliances burning gaseous fuels
- Cableway installations designed to carry persons
- Eco-design of energy related products
- Electromagnetic compatibility
- Equipment and protective systems intended for use potentially explosive atmospheres
- Explosives for civil uses
- Hot-water boilers
- In vitro diagnostic medical devices
- Low voltage
- Measuring Instruments
- Medical devices
- Noise emission in the environment
- Non-automatic weighing instruments
- Personal protective equipment
- Pressure equipment
- Radio and telecommunications terminal equipment
- Recreational craft
- Safety of toys
- Simple pressure vessels
- Restriction of the use of certain hazardous substances RoHS 2
For a complete listing, see the New Approach website established by the European Commission and EFTA with the European Standardisation Organisations.
It may however be better to follow the New Legislative Framework - per January 2010 - possible to be changed in 2015. New Legislative Framework
Mutual recognition of conformity assessment
There are numerous 'Agreements on Mutual Recognition of Conformity Assessment' between the European Union and other countries such as the USA, Japan, Canada, Australia, New Zealand and Israel. Consequently, CE marking is now found on many products from these countries. Japan has its own marking known as the Technical Conformity Mark.
Switzerland and Turkey (which are not members of the EEA) also require products to bear CE marking as an affirmation of conformity.
Characteristics of CE marking
- The CE marking has to be affixed by the manufacturer or its authorized representative in the European Union according to its legal format visibly, legibly and indelibly to the product
- When a manufacturer puts the CE marking on a products this implies that he complies to all the Essential Health and safety requirements from all the directives that applies to its product.
- For example for a machine, major Directives that applies are : * Low voltage directive * EMC directive * Machinery directive 2006/42/EC * ATEX directive * and sometimes other legal requirements.
When the manufacturer of a machine puts the CE marking, it engage himself and guarantee, that he makes all the tests, assessments and evaluation on the product to conform all the requirements of ALL the directives that applies to its product.
- CE marking has been introduced by the COUNCIL DIRECTIVE 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (non-automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC (new hot-water boilers fired with liquid or gaseous fuels) and 73/23/EEC (electrical equipment designed for use within certain voltage limits)
- The size of the CE marking must be at least 5 mm, if enlarged its proportions have to be kept
- If the appearance and workmanship of a product do not allow for the CE marking to be affixed on the product itself, the marking has to be affixed to its packaging or accompanying documents
- If a directive requires the involvement of a Notified Body in the conformity assessment procedure, its identification number has to be put behind the CE logo. This is done under the responsibility of the Notified Body.
On motor vehicles and related parts the UNECE "e mark" or "E mark", rather than the CE logo, has to be used. Other than the CE logo, the UNECE marks are not self-certified. They are not to be confused with the estimated sign on food labels.
The European Commission is aware that CE marking, like any other mark, is misused. CE marking is sometimes affixed to products that do not fulfill the requirements and conditions for its affixing, or is affixed to products for which the affixing is not required. In one case it was reported that "Chinese manufacturers were submitting well-engineered electrical products to obtain conformity testing reports, but then removing non-essential components in production to reduce costs". A test of 27 electrical chargers found that all the eight legitimately branded with a reputable name met safety standards, but none of those unbranded or with minor names did, despite bearing the mark; non-compliant devices were actually potentially unreliable and dangerous, presenting electrical and fire hazards.
There are also cases in which the product complies with the applicable requirements, but the form, dimensions, or proportions of the mark itself are not as specified in the legislation.
A very similar CE marking has been alleged to stand for China Export because some Chinese manufacturers apply it to their products. However, the European Commission says that this is a misconception. The matter was raised at the European Parliament in 2008. The Commission responded that it was unaware of the existence of any "Chinese Export" mark and that, in its view, the incorrect application of the CE marking on products was unrelated to incorrect depictions of the symbol, although both practices took place. It had initiated the procedure to register CE marking as a Community collective trademark, and was in discussion with Chinese authorities to ensure compliance with European legislation.
There are mechanisms in place to ensure that the CE marking is put on products correctly. Controlling products bearing CE marking is the responsibility of public authorities in Member States, in cooperation with the European Commission. Citizens may contact national market surveillance authorities if the misuse of the CE marking is suspected or if a product's safety is questioned.
The procedures, measures and sanctions applying to counterfeiting of the CE marking vary according to the respective Member State's national administrative and penal law. Depending on the seriousness of the crime, economic operators may be liable to a fine and in some circumstances, imprisonment. However, if the product is not regarded as an imminent safety risk, the manufacturer may be given an opportunity to ensure that the product is in conformity to the applicable legislation before it is obliged to take the product off the market.
- Directive 93/68/EEC
- "What does the CE marking on a product indicate?". European Union.
- "What does CE marking stand for?". European Union Enterprise and Industry.
- European Commission: CE marking: further information
- ANEC position paper, "CE Marking - Buyer Beware", November 2012
- CE Marking, Retrieved 05/21/2013
- CE Marking Process
- Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (non-automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC (new hot-water boilers fired with liquid or gaseous fuels) and 73/23/EEC (electrical equipment designed for use within certain voltage limits)
- Jarvis, Tim. ""e" is for Automobile Electronics". Compliance Engineering. Retrieved 28 December 2008.
- "estimated" sign for food weight/volume, information by the UK government.
- Buckinghamshire Trading Standards: What’s in your socket?, 2008. Detailed article on hazards found due to poor-quality AC adapters. "The good news for the consumer is that there appears to be a cheap charger for any make or model of mobile phone, toy or hand-held games consoles that you might require – the bad news is that it could kill you!"
- Misconception attributing CE marking the meaning ‘Chinese export’
- CE China Export (mark), archived from the original on 16 October 2010, retrieved 2012-04-11; CE Marking, retrieved 2012-04-11
- Question to EU parliament about China Export
- "Answer to a written question – China Export (CE) mark feeding off the reputation of the European Conformité européenne (CE) mark – P-5938/2007". www.europarl.europa.eu. Retrieved 9 March 2011.
|Wikimedia Commons has media related to CE logo.|